The user can define the channels that make up each of these two layers. SHIFT buttons allow you to assign more than one function to the same MIDI controller button. The pickup mode allows to avoid sudden changes in the values of the parameters, since the controller must reach the current value of the parameter so that it starts to change. The same will happen when changing the function of the knobs, when the knobs are not encoders but potentiometers. When using controllers not compatible with Mackie Control, or without motorized faders, the position of the faders will not correspond to the current values of the parameters when changing bank or fader layer. This way we can supply the lack of faders with the knobs.
This function is useful with controllers such as the X-Touch-Mini, which has 8 strips, each with 1 knob and 2 buttons, but only the master strip has a fader. Function "FADERS TO KNOBS", assigns to the knobs the same function as the faders.
EQUALIZER FOR MAC OS 10.9.5 PC
In addition to the MIDI controllers of the fader bank, buttons external to the bank strips (buttons zone) can also be controlled with up to 2 additional MIDI controllers, and with the PC keyboard.OsiMIDI Stage allows to use up to 3 MIDI controllers for the fader bank, simultaneously, forming a group of controllers that behave as if you had a single controller with greater number of faders, knobs and buttons, allowing to form a bank with greater number of strips.New functionality Compatible with AES50 I/O stage boxes. The 7-segment displays will show the selected channel, and the function of the knobs and the faders layer currently selected. In the scribble strips the names of the channels or the values of the parameters will be displayed, according to the function of the knobs selected at each moment. Control of scribble strips, meters and 7 segments displays, in controllers that are capable of emulating Mackie Control and that have these elements.Control of the FX taps (for effects of type delay and chorus).Performs 2 functions simultaneously: Selects the fader layer Home LR and selects the Gain knobs function. It is also shown in the Assignment Display, if we use a MIDI controller that is able to emulate Mackie Control and that has that display. The selected channel is identified by the corresponding led of the button on the MIDI controller. The selected channel can be set using the “select” buttons on each strip of the controller, or through the left channel and right channel buttons. It allows to select which channel we are editing with the knobs, when the function of knobs is: gate, compressor, equalizer or low-cut. It is also shown in the left side of the Timecode Display, if we use a MIDI controller that is able to emulate Mackie Control and that has that display.Ĭhannel selection. The current function is identified by the corresponding led of the button on the MIDI controller. Depending on the selected function, the knobs allow you to modify the gain or pan of the channels of the strip to which they belong, or the gate, equalizer, compressor or low-cut parameters of the selected channel. Control of solo and mute of each channel, including masters and DCAs.Control of the master of the current layer, using the fader at the right of the MIDI controller.X32 and M32 Series: Main LR, Bus 1 to 12, FX 1 to 4, M/C, Matrix, DCAs and 2 custom layers.XAIR and MAIR Series: Main LR, Bus 1 to 6, FX 1 to 4, DCAs, DCAs + FX and 2 custom layers.
The number of layers depends on the number of buses in the digital mixer model: It is also shown in the right side of the Timecode Display, if we use a MIDI controller that is able to emulate Mackie Control and that has that display. The current layer is identified by the led of the corresponding button on the MIDI controller. Layered working mode for faders: The faders adjust the channel level to the main bus, send level to a monitor or effect bus, or DCA group level, depending on the currently selected layer.
0 kommentar(er)
